CRAFT GEN 3

Dimensions 

GEN 3 complete

• Height: 58 cm
• Width: 48 cm
• Depth: 30 cm

Smart Keg complete

• Height: 32 cm
• Width: 29 cm
• Depth: 33 cm

Batch Size:

• 5-6 Liters (approximately 25 glasses)

Ambient Conditions:

• General Temperature: +15 to +25 degrees Celsius
• Smart Keg Temperature: +5 to +25 degrees Celsius

Cooling and Serving Capacity

• The Smart Keg uses Peltier technology to achieve up to a 19°C temperature difference based on ambient conditions.

Humidity Conditions:

• 30% to 80% relative humidity (RH)

Altitude:

• Suitable for altitudes up to 2000 meters above sea level

Power and plug

• Input: 220-240 volt, 50/60 hertz
• Consumption: 1300 watts
• EU power cord (F-plug)
• Water inlet and outlet plug

Internet Connection:

• 2.4 GHz Wi-Fi (802.11n)

Control:

• Compatible with iOS, Android, and Web platforms

Pro-membership

• You can add a Pro-membership, granting you access to an extensive library of recipes from brewers and users, allowing you to clone, tweak, or craft your own unique brews.

Box 1: Complete Brewing System

• Base Station: 1x Main Frame
• Mash Tun: 1x Mash Tun with Lid/Seal, 2x Mash Tun Filters, 1x Condenser, 1x Sparge Plate, 1x Brewing Filter
• Hop Equipment: 1x Hop Carousel, 1x Hop Cover
• Smart Keg 3.0: 1x Smart Keg with Pressure Relief Valve and Beer Tube
• Connectors & Regulators: 2x Ball Lock Connectors, 1x CO2 Regulator (psi), 1x Airlock with Rubber Stopper, 1x Tap, 1x Keg Stand, 1x Trub Container
• Tubing: 1x Water Outlet Tube, 1x Water Inlet Tube
• Cleaning: 1x Clean-In-Place System, 1x Rinse Connector
• Power Supply: 1x (220-240V with EU Power Plug)
• Warranty: 2-Year Warranty

Box 2: Starter pack

• 1x Sanitizer spray bottle: for cleaning during brewing
• 1x Cleaning material: CHEMSAN bottle (100ml): for cleaning during brewing
• 1x Silicone grease: for cleaning O-rings
• 1x Blow-off tube: for extreme fermentation schedules
• 2x dishwasher tablets: for cleaning the keg
• 2x sets (5 pieces) reusable hop bags: for adding hops
• 3x threaded CO2 cylinders (16 grams): for adding CO2 to the beer

Compatibility:

The GEN 3 is compatible with the pilot machine and GEN 1, GEN 2, and GEN 3 Smart Kegs. Identify your machine type by checking the serial number on the back; it should start with 1915, 1935, 2121, or 2130. You can add multiple Smart Kegs to your profile.